In order to better prevent the breeding of swimming pool algae and bacteria, to protect the surface swimming pool bricks and pool equipment, please refer to the following methods to deal with pool water and swimming pool facilities at the end of winter:
1. Perform an impact of oxidation break point.
2. Add some special organic alkali chemical products to stabilize pH and prevent scaling.
3. Keep the water treatment plant 6-8 hours of operation to ensure the uniform distribution of the products used.
4. Turn off the water pump and remove all the switches on the power control board.
At this time, the water level needs to be reduced to 10--15 cm under the overflow channel or the foam to allow the pipeline of the filter system to drain freely. Keep continuous water level when it rains. Give special attention to any type of overflow channels. If you have ice, you must place some floating objects in the swimming pool to prevent ice from cutting the throat around the pool. Note that these details will save a lot of manpower and material maintenance after spring. In accordance with the above measures, you can keep the swimming pool brick (pool mosaic), equipment and shells in a good state, making the swimming pool more lasting.
