1. Put and fix
Because mosaic uses the bottom of the net, it can be directly applied to the wall with tile glue. Put the mosaic vertically.
2. Reinforcement
After each tile is located, use the gray board to light the mosaic surface to make it fastened on the wall.
3. Make sure the gray seam is consistent
Before starting the sewing material, the gap between the bricks must be determined as a unified width. In this way, it is necessary to adjust the gray seam with a small gray shovel. This is the most patient process in the process of paving the mosaic process, but the process of labing work is the most important link.
4. Filling agent
Use a small ash shovel, take a small amount of mixed sewing agent each time, and evenly apply it to the surface of the mosaic. The small ash shovel must move the diagonal. Full filling and no extra residues.
5. Clean
Start cleaning the mosaic surface. Prepare two barrels, one new cleaner, and the other to install clean water. First, wet the rag in the barrel of the cleaning agent, wipe the surface of the mosaic in a circle; then install it in the second one with cleanliness cleaning in the second one. Wet the sponge in the bucket, and then wipe the surface of the mosaic with a sponge to wipe all the remaining objects. Finally, use a sponge to wipe the surface again until it is clean.
